Ace Techman knows how frustrating it can be when assembling a system that functions at its optimal performance when what you need are a few small parts like screws or nuts. StarTech.com carries all parts [more] all parts big or small. [less]
Extremely Quiet The low speed 92 mm fan reduces the noise level to a minimum. The patented fan holder is able to practically eliminate the typical buzzing sound of 92 mm fans. Patent No 203 07 981 U1 ( [more]7 981 U1 (Germany) Patent No 10/834 232 (USA) The PWM chip in the motor allows an exact fan speed control via BIOS. (4 wire) 6 Heat Pipes (three used double sided) are able to transfer heat up to 200 Watt. The heat exchanger is built of 42 fins and consists of a surface area of over 4700 cm2 and allows for resistance free energy transfer to air. Air is drawn in from the side of the fan to cool the components around the CPU. Some air is blown out towards the voltage converters o-n the mainboard with the bent fins at the bottom. The four rubber connectors o-n the fan case act as a vibration damper to absorb the vibration of the running fan and prevent vibration transfer to the heatsink and the case. The cooler is to install without any tools within seconds. The ARCTIC Ceramic Bearing provides an unmatched Life Time of 137'000h (L10@40?C) resp. an MTBF@70?C of 163'000h and thus a 6 year warranty. [less]
The ARCTIC F Series is a high performance case fan for anyone looking for a quiet and efficient case fan. The refined ninja-knife impeller design not only improves the laminar airflow but it also lowers [more]lso lowers the noise level significantly. The ARCTIC F Series fans remain inaudible even running at full speed. The ARCTIC F Series fans are equipped with nine blades increasing the airflow by 20% compared to generic seven-blade fans. The ARCTIC F Series have a standard frame making it possible to install the fans either intaking or outtaking air in the PC case. The standard three-pin connector can easily be connected directly to mainboards. [less]
The solution? StarTech.com?s HSFPHASECM. This handy thermal pad offers a mess-free installation maximum heat conduction and increased cooling.Heat is the enemy of your processor. If you have used a traditional [more]raditional heatsink paste for your CPU installations you know that it is messy and difficult to apply. An uneven application can reduce the effectiveness of your heatsink and raise the operating temperature of your processor increasing the chance of premature failure. [less]
A high quality metallic solution that helps to ensure maximum dissipation of heat generated by the CPU for optimized performance and greater system stability; and is more effective than standard silicon
[more]con-based heat grease/CPU paste providing optimum protection against CPU heat damage.Our thermal CPU paste improves the effectiveness of CPU coolers by thermally bonding the CPU to the heatsink.
[less]
The ARCTIC F9 integrates some delicate features to improve the overall airflow and noise control management. Most 80mm and 92mm standard fans are equipped with 7 blades only but all ARCTIC F9 fans including [more] including the 80mm and 92mm ones come with 9 blades in order to create higher airflow efficiently. Moreover the refined 'ninja-knife' impeller design not only improves the laminar airflow but it also lowers the noise level. Tested by hundreds of simulations the result is significant - airflow is over 20% higher compared with a generic 7-blade case fan. The ARCTIC F Series have a standard frame making it possible to install the fans either intaking or outtaking air in the PC case. The standard three-pin connector can easily be connected directly to mainboards. [less]
This PC case fan is an economically-priced add-in cooling fan designed to provide efficient cooling for your PC. Able to exhaust warm air out or circulate cool air into the case the FANBOXSL can help [more]L can help to eliminate overheated components and maintain peak performance within your system. Featuring an Ever Lubricate bearing design for longer life beyond similar featured sleeve bearing models this quiet running fan offers up to 24.81 CFM (cubic feet per minute) of air. Power is supplied to the fan using a power tap connected to the large LP4 power connector on your PC's power supply. [less]
The case ventilation system in lockstep the CPU gives the beat. The ARCTIC F PWM is forwarding the PWM signal from the CPU to the whole case ventilation system. This way the entire system is cooled quietly [more]ed quietly but still offers the performance when needed. With the standard 25mm frame the ARCTIC F PWM can be applied as sucking and blowing system fan. Thanks to fluid dynamic bearing and the patented fan holder design the ARCTIC F PWM is not only quiet but also highly durable. Via the PWM signal the CPU fan is controlled by the mainboard to reach the ideal temperature for the CPU. The patented PST (PWM Sharing Technology) is forwarding the PWM signal to all other fans inside the system. This way all fans are spinning at the same speed. This provides silent operation in idle mode but also gives sufficient performance when required to offer efficient cooling. The Arctic F PWM series outperforms other 80mm/92mm/120mm fans in the market. [less]
The case ventilation system in lockstep the CPU gives the beat. The ARCTIC F PWM is forwarding the PWM signal from the CPU to the wholecase ventilation system. This way the entire system is cooled quietly [more]ed quietly but still offers the performance when needed. With the standard 25mm frame the ARCTIC F PWM can be applied as sucking and blowing system fan. Thanks to fluid dynamic bearing and the patented fan holder design the ARCTIC F PWM is not only quiet but also highly durable. Via the PWM signal the CPU fan is controlled by the mainboard to reach the ideal temperature for the CPU. The patented PST (PWM Sharing Technology) is forwarding the PWM signal to all other fans inside the system. This way all fans are spinning at the same speed. This provides silent operation in idle mode but also gives sufficient performance when required to offer efficient cooling. [less]
Density: 3.69 g/ cm3 Viscosity: 850 poiseMX-2 is a high thermal conductivity and low thermal resistance compound for components that require optimum thermal dissipation. It is ideally suited for use in [more]for use in CPU GPU cooling and other applications between power semiconductor components and heat sinks where thermal conductivity is a major factor. Since the MX-2 does not contain any metal particles there are no problems regarding electrical conductivity or capacitance. Unlike other silver and copper compounds MX-2 ensures that contact to electrical traces pins and leads cannot result in any damage. With MX-2 no curing and no bleeding of the compound are possible. In contrast to other products this compound does not show decreasing performance over time does not need to be reapplied and has a durability of at least 8 years. [less]
The ARCTIC F Pro PWM fans outperform other 80mm/92mm/120mm fans in the market. The patented PWM Sharing Technology (PST) regulates the speed up to 5 fans via BIOS. With efficient central cooling the ARCTIC [more]the ARCTIC F Pro PWM fans offer excellent cooling and noise control performance for the system. CPU and VGA cards nowadays generate increasing amount of heat which leads to high case ambient temperature. Some users will use more case fans to cool down the case. However this will produce more noise and energy will be wasted as all fans run at full speed even after the case temperature is lowered. Using the new ARCTIC F Pro PWM fan can solve these problems without any hassles. Firstly with PWM signal the fan runs at necessary speed according to the CPU load. Furthermore thanks to the innovative patented PST function up to 5 fans (including CPU fans) can be connected to the ARCTIC F Pro PWM fan. The speed of all the fans in this PST system is now centrally controlled by a single PWM signal via BIOS. As a result when the system load increases all fans in the PST system will run faster to lower the case temperature. Likewise when the load is low fan speed will be lower at a necessary speed for sufficient cooling. [less]
The ARCTIC MX-4 is a premium-grade thermal paste with exceptional performance and ease of application. It is an electrically non-conductive paste that is applied between CPU/GPU and designated coolers [more]ed coolers to transfer the dissipated heat from the components to the heat sink. Since the ARCTIC MX-4 is a metal-free compound it eliminates the risks of causing short circuit and in turn adding more protection to your computer. The new formula in the ARCTIC MX-4 features optimal thermal conductivity and low thermal resistance. These characteristics effectively dissipate the emitted heat from the core components. The consistency of the ARCTIC MX-4 is designed for simple application. Its texture is just thin enough to spread onto components using fingers without creating much mess. [less]
The ARCTIC F Pro TC incorporates all features that are needed to create a silent fan. The combination of vibration absorption along with smart temperature control create a silent and self-regulating. [more]egulating. The ARCTIC F Pro TC controls its speed by itself. Thanks to the temperature sensor simply install the fan and no further adjustments or setup is required. The fan controller is set to keep the temperature between 32?C and 38?C. When the temperature is below 32?C the fan spins slowly and silently. If the temperature continues to rise the fan speed will increase to deliver a maximum airflow and in turn cooling the PC more efficiently. The ARCTIC F Pro TC is fully optimized for low noise operation. The combination of temperature control with silent impeller and the patented fan holder makes the ARCTIC F Pro TC the perfect fan for anyone that enjoys silence. The temperature sensor of the fan is installed on a 40cm cable. This gives you great flexibility to install the sensor in a spot that emits heat the most. Ideally the sensor is installed at the top of the PC case since the temperature is highest at this point. [less]
Viscosity (poise) - 850 Density (g/cm?) - 3.96ARCTIC MX-2 is the thermal compound offering high thermal conductivity and low thermal resistance to dissipate heat efficiently from CPU / GPU to the installed [more] installed heatsink. Thermal Compound for All Coolers. The ARCTIC MX-2 compound is composed of carbon micro-particles which lead to an extremely high thermal conductivity. It guarantees that heat from the CPU or GPU can be dissipated quickly and efficiently. With its performance the ARCTIC MX-2 outperforms other well-known thermal compounds in the market. As the ARCTIC MX-2 does not contain any metallic particles so electrical conductivity will not be an issue. Unlike other silver and copper compounds the ARCTIC MX-2 ensures that contact with any electrical pins would not result in any sort of damage. Moreover the ARCTIC MX-2 is very easy to apply as it has ideal consistency. In contrast to metal and silicon thermal compound the ARCTIC MX-2 does not show decreasing performance over time. It does not need to be re-applied and has a durability of at least eight years. [less]
Improves the heat transfer between a CPU and heatsink to keep the CPU running cooler. Effectively fills surface imperfections on CPU to prevent air pockets and help heat transfer. Ceramic-based compound
[more]und that is electrically non-conductive for safe use around electronics. Replace old or dried out thermal paste to replenish heat dispersion between a CPU and heatsink. System builders who put together many low-end to mainstream systems.The HEATGREASE20 CPU Thermal Paste Compound can be used to improve the effectiveness of a CPU cooler by thermally bonding the surface of the CPU to the heatsink which enables the heatsink and fan to work more efficiently to remove harmful heat from the CPU. This 20g tube of ceramic-based thermal grease is enough for a large number of CPU installations for most home or business computers or any other light application where good thermal bonding between two surfaces is required.
[less]
The ARCTIC F PWM fans outperform other 80mm/92mm/120mm fans in the market. The patented PWM Sharing Technology (PST) regulates the speed up to 5 fans via BIOS. With efficient central cooling the ARCTIC [more]the ARCTIC F PWM fans offer excellent cooling and noise control performance for the system. Featuring PWM function the ARCTIC F PWM fans run at the most necessary speed to deliver maximum cooling capacity at the lowest noise level possible. On top of that thanks to the patented innovative PWM Sharing Technology (PST) up to 5 fans (including CPU fans) can be connected to the ARCTIC F PWM fan to share the PWM signal. The speed of all the fans in this PST system is now centrally controlled by a single PWM signal via BIOS. [less]
When the ambient temperature is below 32?C the fan speed remains relatively stable at its minimum spinning rate 500 RPM. This speed gives adequate ventilation at lowest noise level. The steep curve signifies
[more]ies that when the detected temperature reaches above 32?C the fan speed rapidly increases to 2000 RPM to provide immediate cooling. Since it is optimal to keep case temperature between 30?C to 38?C the temperature controller signals the fan and reduces the heat drastically when it reaches above the critical range. The ARCTIC F TC Fan is equipped with nine blades to efficiently create higher airflow inside a computer case. This refined 'ninja-knife' design improves laminar air flow while reducing noise level at the same time. The nine-blade fans have proven to operate at 20% higher efficiency than regular seven-blade ones as it can increase airflow rate and remain nearly inaudible at most times. Since the ARCTIC F TC Fan incorporates the technology of sensor cable and a two-way mountable frame it is a flexible and ultimate cooling solution with efficient cooling performance at a minimum noise level. The ARCTIC F TC Fan can certainly improve computer case ventilation system entirely and effectively. The ARCTIC F TC (Temperature Control Fan) is a case fan that regulates itself by signaling an appropriate fan speed to provide optimal air ventilation within a PC case. This technology incorporates a fan controller on board - users can simply plug-and-use without adjusting BIOS system since the fan is able to run by itself. The ARCTIC F TC Fan features a temperature sensor cable to detect internal temperature and regulate fan speed automatically. The relationship between the detected temperature and fan speed is positively correlated - the warmer the temperature the faster the fan speed would turn. With a 40cm long intelligent sensor probe it is very flexible for users to attach it to anywhere that can accurately detect the internal case temperature. The ARCTIC F TC Fan is connected with a three-pin connector and is available in three standard sizes: 80mm 92mm and 120mm. Its mounting frame is 25mm thick with screw holes on both sides which can be mounted in both ways for blowing or extracting air in the computer case. This offers great flexibility for users to install it as an intake or outtake fan.
[less]
Overheating hardware can be a problem in most Server rooms. With StarTech.com\'s TX3 Replacement Ball Bearing Fan you can avoid problems to workstations.
The ARCTIC F Pro PWM fans outperform other 80mm/92mm/120mm fans in the market in regards to their performance/noise ratio. With efficient central cooling the ARCTIC F Pro PWM fans offer excellent cooling [more]nt cooling and noise control performance for the system. The ARCTIC F Pro PWM fans deliver unbelievably quiet performance. The key to this performance is the patented vibration absorption of the ARCTIC F Pro PWM fans. This sophisticated feature absorbs vibration caused by the motor of the fan. This way the vibrations can't be transmitted to the PC Case and other components. With the innovative patented PWM Sharing Technology (PST) function the ARCTIC F Pro PWM can connect up to five fans including CPU fans. The speed of all the fans in this PST system is now centrally controlled by a single PWM signal via BIOS. Installation can never be easier. Users can mount the ARCTIC F Pro PWM fans on the PC case by the four screws provided. Alternatively these fans can be installed with screwless mounting mechanism provided in the chassis. [less]
This 70mm TX3 Dual Ball Bearing CPU Cooler Fan is a cost-effective replacement fan for standard CPUs as well as many different types of 1U or low profile CPU coolers that use a 70mm fan. For peace of [more]r peace of mind the CPU cooling fan features a Tachometer pin on the TX3 motherboard connector that provides the host system with fan operating status while a dual ball bearing design helps provide smooth operation and longer (fan) lifespan. [less]