The DFE-528TX is a high-performance auto-sensing 10/100Mbps dual-speed Adaptor for the PCI bus. Installable in a PC equipped with PCI expansion slots this card turns a desktop computer into a high-bandwidth graphic/multimedia workstation running at full-duplex speed.

This card is designed for bandwidth-demanding mission-critical client/server applications. It provides 4 Fast Ethernet ports for a very fast trunk link to a Fast Ethernet switch. The card plugs into the server's PCI expansion slot. Connection to the switch is over the twisted-pair copper cable. Each of the 4 ports can establish an independent full-bandwidth segment with a Fast Ethernet switch. When all 4 ports are connected to a switch an 800Mbps trunk (aggregate-bandwidth with 4 Fast Ethernet ports running at full duplex) is created for high-speed simultaneous access by workstations.

The D-Link DGE-528T is a high-performance 10/100/1000Mbps copper Gigabit PCI card for desktop PC. Installable in a PC equipped with PCI expansion slots this card turns a desktop computer into a high-bandwidth Gigabit workstation or a server running at 2000Mbps full-duplex speed. Capable of running at full-duplex Gigabit speed this card gives your PC 2000Mbps data transmission on your existing Cat. 5 twisted-pair network cable. As an inexpensive alternative solution to fibre-optic the card allows you to instantly upgrade to Gigabit without requiring you to install new expensive fibre cables. The card supports 10/100/1000Mbps network speed auto-sensing and full/half duplex auto-negotiation. The card provides on-board screening of VLANs Tagged Ethernet frames allowing your PC to be configured with VLAN-supported switch. Your PC can be part of a VLAN network where domains are segmented up to enhance performance and security.

The DKVM-CB Keyboard Video and Mouse (KVM) cable is a 6 foot cable that is compatible with D-Link DKVM series KVM Switches. It is also compatible with most KVM switches available on the market today. Each end of the cable includes a keyboard and mouse connector (6 pin Mini-Din Male) and a video connector (15 Pin HDD Male). The Video cable is designed to ensure the highest quality of video over a KVM switch connection.

The DES-1005D is an unmanaged 10/100Mbps switch designed to enhance small workgroup performance while providing a high level of flexibility. Powerful yet easy to use this device allows users to simply plug any port to either a 10Mbps or 100Mbps network to multiply bandwidths boost response time and satisfy heavy load demands. The switch comes with 5 10/100Mbps ports allowing a small workgroup to flexibly connect to Ethernet ad Fast Ethernet and integrate. These intelligent ports detect the network speed and auto-negotiate between 100BASE-TX and 10BASE-T as well as between full- and half-duplex. All ports support 802.3x flow control. This function minimizes dropped packets by sending out collision signals when the port's receiving buffer is full. Flow control is available in the full-duplex mode.

The DES-1005D is an unmanaged 10/100Mbps switch designed to enhance small workgroup performance while providing a high level of flexibility. Powerful yet easy to use this device allows users to simply plug any port to either a 10Mbps or 100Mbps network to multiply bandwidths boost response time and satisfy heavy load demands. The switch comes with 5 10/100Mbps ports allowing a small workgroup to flexibly connect to Ethernet ad Fast Ethernet and integrate. These intelligent ports detect the network speed and auto-negotiate between 100BASE-TX and 10BASE-T as well as between full- and half-duplex. All ports support 802.3x flow control. This function minimizes dropped packets by sending out collision signals when the port's receiving buffer is full. Flowcontrol is available in the full-duplex mode. All ports support auto-negotiation of MDI/MDIX cross over. This eliminates the need for cross over cables or uplink ports. Any port can simply plug to a server a hub or a switch using the usual straight-through twisted-pair cable. With 5 plug-and-play ports the switch is a perfect choice for the small workgroup to upgrade performance in a client/server environment.

The D-Link AirPlus G DWL-G630 Cardbus Adaptor is a wireless laptop Adaptor featuring the very latest in advanced wireless silicon chip technology including enhanced security to shield and protect your wireless communication from intruders. The DWL-G630 wireless laptop Adaptor also works with 802.11b standard wireless devices and when used with other D-Link AirPlus G products delivers throughput speeds capable of handling heavy data payloads. The DWL-G630 wireless laptop Adaptor features WPA and 802.1x for wireless user authentication providing you a much higher level of security for your data and communications.

D-Link the industry pioneer in wireless networking introduces the DWL-G122 USB Adaptor part of the AirPlus G family of 802.11g wireless networking devices. Using the DWL-G122 you can now enable 802.11g wireless connectivity for your PC using the convenience of a USB interface. Featuring the latest in wireless technology the DWL-G122 delivers incredibly fast performance and industry-wide compatibility. By adhering to the 802.11g wireless standard the DWL-G122 is capable of quickly transferring large files or view streaming video. The DWL-G122 includes an easy-to-use configuration that discovers available wireless networks wherever you go. The utility can also create detailed connectivity profiles to save your most frequently used networks. Using the configuration utility you can enable support for WPA and 802.1x for better data encryption and user authentication.

The DES-1008D is an unmanaged 10/100Mbps switch designed to enhance small workgroup performance while providing a high level of flexibility. Powerful yet easy to use this device allows users to simply plug any port to either a 10Mbps or 100Mbps network to multiply bandwidths boost response time and satisfy heavy load demands. The switch comes with 8 10/100Mbps ports allowing a small workgroup to flexibly connect to Ethernet and Fast Ethernet and integrate. These intelligent ports detect the network speed and auto-negotiate between 100BASE-TX and 10BASE-T as well as between full- and half-duplex. All ports support 802.3x flow control. This function minimizes dropped packets by sending out collision signals when the port's receiving buffer is full. Flow control is available in the full-duplex mode. All ports support auto-negotiation of MDI/MDIX cross over. This eliminates the need for cross over cables or uplink ports. Any port can simply plug to a server a hub or a switch using the usual straight-through twisted-pair cable. With 8 plug-and-play ports the switch is a perfect choice for the small workgroup to upgrade performance in a client/server environment.

8 10/100Mbps Ports - Unmanaged Stand-alone - Layer 2 Switch: This compact palm-sized switch is designed for the home and small offices. It provides 8 10/100Mbps ports to connect to 8 workstations and servers. Hubs can also connect to this switch. All ports auto-sense the network speed of the computers and hubs to run at either 10Mbps or 100Mbps. The ports also auto-negotiate between full and half duplex and support flow control. Expansion is easy through a MDI uplink port. You cascade several switches together through this port to get more ports.